By pressing ‘print’ button you will print only current page. Check the TR Q7 and the reated Pattern 3. Separate the Cover-Plate 7 from the Cover- Housing 3. Refer to the Operation Manual about the busy condition. Connector pin 0, 48 Drawer kick-out connector pin 2 1, 49 Drawer kick-out connector pin 5 Samsung Electro-Mechanics So, the Data Bits are stored in both Shift Register 1 and 2.

Uploader: Milabar
Date Added: 2 December 2017
File Size: 41.91 Mb
Operating Systems: Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X
Downloads: 74810
Price: Free* [*Free Regsitration Required]

Remove the two screws 2 3. Panel Pba And Sensor Problem 2. Page of Go. Check the Control, Status Data Line 3. Remove the two screws bixolon srp 350pg.

Comments to this Manuals Your Name. Remove the screws 1.

Check the TR Q7 and the reated Pattern 3. Remove the two Screw 8.

Samsung SRP-350PG – SRP 350 B/W Direct Thermal Printer Service Manual

Page 66 Set the distance from the beginning of the line to the position at which subsequent characters are to be printed.

Remove the Washer slip 6.

Doing so can damage the thermal element. Separate the Cover-Plate 7 from the Cover- Housing 3. Paper near-end is detected by the paper roll Near-END sensor.

Page 89 Handshake 1. Page 71 Paper roll near-end sensor disable.

Remove the connector wires from main PBA and sub assembly. Remove the three screws 4. Open bixolon srp 350pg auto cutter cover with power ON. To print the manual completely, please, download it. An electrolytic capacitor installed with the wrong polarity might explode. The printer repeats the operation r times. Paper roll Near-END sensor: Paper roll end sensor disable.

Enter text from picture: Bixolon srp 350pg 18 The host transmits a data to the printer, after confirming this bixolon srp 350pg. The host transmits a data to the printer, after confirming this signal. Commands Transmits the selected printer status specified by n in real-time, according to the following parameters: Transmit paper roll sensor status.

Add to my manuals Add. The host computer is BUSY. Remove the Spring Hook 1. Check the USB Cable whether it is open or short 5.

SAMSUNG SRPPG – SRP B/W DIRECT THERMAL PRINTER SERVICE MANUAL Pdf Download.

Check the Harness 6. Paper roll near-end sensor disable. Check the Solenoid in the Drawer Compulsory Failure? Connector pin 0, 48 Drawer kick-out connector pin 2 1, 49 Drawer bixolon srp 350pg connector pin 5 Samsung Electro-Mechanics Differential Common Mode Range: The content of data is same. Paper roll end detected by paper roll-end sensor.

Check whether Signal is affected by the Cable Noise Handshake 1.

Close the auto cutter cover. Page 61 The content of data is same. Pull up the roll paper cover by hand. Set the distance from the beginning of the line to the position at which subsequent characters are to be printed.

Separate the Cutter-Blade 5 from the Fixed- Cutter 2. First stp the “Safety Precautions” section of this manual. Printing bixolon srp 350pg 0, 48 Not printed. Paper roll end sensor enable. Separate the Manual-Cutter 5 from the Case-Upper 6. Page 67 [Description] Turns underline mode bixollon or off, based on the following bixolon srp 350pg of n: